VANTRUE Smart Cube Voice Controlled Dash Cam Benutzerhandbuch Seite 17

Watermark Stamp: By default, video and photos are stamped with the date,
•
time, VANTURE brand, license plate number, GPS location, and speed
information. This can be enabled or disabled as preferred.
Time-Lapse Recording: Time-lapse is disabled by default. You can enable it at
•
intervals of 1FPS, 5FPS, 10FPS, or 15FPS.
Parking Mode: Select the preferred parking mode, with options including
•
Collision Detection, Motion Detection, Low Bitrate Recording, Low Frame Rate
Mode, or Off.
GPS Functionality: GPS is enabled by default, which includes settings for GPS
•
data, speed unit preference, and GPS location data in video.
B. System Setup
Language Options: This device supports multiple languages: English, French,
•
Spanish, German, Italian, Chinese, Russian, and Polish.
Wi-Fi Connectivity: By default, Wi-Fi is set to turn on automatically. You have the
•
option to configure Wi-Fi to either enable or disable automatically and to access
Wi-Fi settings.
Screen Display Settings: The screen is set to Full Screen mode by default. There
•
is an option to switch to Panorama mode if desired.
Voice Command Sensitivity: The standard sensitivity setting is enabled for voice
•
commands. You can adjust this to low, high, or turn it off according to your
preference.
Voice Command List: Access and use various voice commands to control the
•
camera.
Memory Card Formatting Reminder: To remind you to format your memory
•
card periodically, you can set reminders for every 15 days or every month. When
the reminder is due, you can choose to format immediately or postpone it.
Date & Time Configuration: Set the time and date manually or through GPS,
•
which is enabled by default. The GPS updates the date and time automatically
according to your time zone. You can also manually adjust the date and time if
you prefer.
Automatic Screen Off: The screen is set to turn off automatically after a period
•
of inactivity to save power. You can set this feature to activate after 3 minutes, or
turn it off to keep the display on continuously.
Volume Settings for Device: Adjust the device's volume, with the default level
•
being 3. The range is from 0 (mute) to 5 (loudest).
Notification Sounds: The dash cam comes with various notification sounds for
•
different functions like power on/off, button presses, file locking, formatting, and
recording stop alerts. These are enabled by default.
Video Frequency: To prevent flickering in videos, you can select a frequency of
•
either 50 Hz or 60 Hz, depending on your region.
17