Instant MFM2000 Benutzerhandbuch Seite 11

Plugging in your Instant Frother Station
Once you've followed the initial setup and washing instructions, plug
the frother base power cord into an outlet.
• The control panel buttons will light up then enter Ready mode.
Default settings for Foam and Temperature levels will light up.
• After 5 minutes of inactivity, the frother enters Standby mode. The
control panel will dim.
• To re-enter Ready mode, press any button or place/remove the
frothing pitcher on/from the frother base.
Sound settings
Turn sound off
1. Press and hold
2. Both and indicator lights blink once. Sound is turned off and
the frother returns to Ready mode.
Turn sound on
1. Press and hold
2. Both and indicator lights blink twice. Sound is turned on and
the frother returns to Ready mode.
and buttons together for 3 seconds.
and buttons together for 3 seconds.
9
User Manual