Atlas BHM R1-6 Sicherheitshinweise Seite 3

BHM R1-6
Declarations
Information regarding Article 33 in REACH
The European Regulation (EU) No. 1907/2006 on Registra-
tion, Evaluation, Authorization and restriction of Chemicals
(REACH) defines among other things requirements related to
communication in the supply chain. The information require-
ment applies also to products containing so called Substances
of Very High Concern (the "Candidate List"). On 27 June
2018 lead metal (CAS nr 7439-92-1) was added to the Candi-
date List.
In accordance with the above this is to inform you that certain
mechanical components in the product may contain lead
metal. This is in compliance with current substance restriction
legislation and based on legit exemptions in the RoHS Direc-
tive (2011/65/EU). Lead metal will not leak or mutate from
the product during normal use and the concentration of lead
metal in the complete product is well below the applicable
threshold limit. Please consider local requirements on the dis-
posal of lead at product end of life.
Regional Requirements
WARNING
This product can expose you to chemicals including lead,
which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more
information go to
https://www.p65warnings.ca.gov/
Safety
DO NOT DISCARD - GIVE TO USER
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result
in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the product
cease to be legible or become detached, replace without
delay.
• The product must only be installed, operated and serviced
by qualified personnel in an industrial environment.
© Atlas Copco Industrial Technique AB - 9846 1025 00
Intended Use
This product is designed for drilling or tapping holes. No
other use permitted.
Safety Signal Words
The safety signal words Danger, Warning, Caution, and
Notice have the following meanings:
DANGER DANGER indicates a hazardous situation which,
if not avoided, will result in death or serious in-
jury.
WARN- WARNING indicates a hazardous situation
ING which, if not avoided, could result in death or
serious injury.
CAUTION CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate in-
jury.
NOTICE NOTICE is used to address practices not related
to personal injury.
Product Specific Instructions
Installation
Mounting of Modular Drill Head Unit for LBD
WARNING Risk of severe injury
Air under pressure can cause injury.
Always shut off the air supply when not in use or be-
►
fore any adjustments.
Drain the hose of air pressure and disconnect the tool
►
from air supply when not in use or before any adjust-
ments.
Always use the correct hose size and air pressure for
►
the tool.
WARNING Risk of Injury
Do not start the tool before assuring that the drill head is
correctly assembled to the drive unit. An incorrectly as-
sembled drill head may come loose with high speed and
cause bodily injury and/or property damage.
Check that you hear a click sound to ensure that the
►
units have been correctly assembled.
Check that the lock ring is flush with the nut.
►
Safety Information
3