Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating basics
3. You can move plot windows by dragging the Plot view title bar to a new position. The blue background area moves to show where the
plot will be located when you remove your finger from the title bar. You can also resize plot windows by selecting and dragging the Plot
view border. You should use a mouse to do these operations, as it is easier to select and drag plots with a mouse.
4. Double-tap within a Plot view to open a configuration menu to set display characteristics. Tap the Help icon on the configuration menu
title for more information on that menu's settings. Tap outside the menu to close the menu.
Add a Search
Use this procedure to set search criteria and mark a waveform where those events occur.
You can search on analog and digital signals, math waveforms, and reference waveforms. You can add searches to different waveforms
and multiple searches to the same waveform.
Prerequisite: Display the channel or waveform signal on which to search. The waveform must be displayed to create a search for it.
1. Tap the Add New...Search button to open the Search configuration menu.
2. Use the configuration menu fields to set the search criteria in the same way that you would set for a trigger condition (select the
Search Type, Source, and conditions on which to search).
Note: You cannot search for sequential events (there is no Sequence search type).
3. The searched waveform is marked with one or more triangles as soon as the search criteria becomes true. Each search uses a
different color for its markers. The example image shows search criteria set to find positive pulse widths that are less than 70 ns wide.
56
Werbung
