Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Getting acquainted with your instrument
Task
Increase or decrease the zoom area
while in Zoom mode.
Quickly scroll or pan a waveform or
list.
Close or open the Results Bar to
increase the Waveform View area.
Change the position of badges in
the Settings Bar or Results Bar.
Cleaning the instrument
Use a dry, soft cotton cloth to clean the outside of the unit. If any dirt remains, use a cloth or swab dipped in a 75% isopropyl alcohol
solution. Use a swab to clean narrow spaces around controls and connectors. Do not use any liquid cleaning agents or chemicals that
could damage the touch screen, case, controls, markings or labels, or possibly infiltrate the case. See the Quick Start Manual for more
detailed cleaning instructions.
40
Touchscreen UI action
Touch and hold two fingertips on the waveform
view, move them together or apart vertically or
horizontally, lift from screen; repeat.
Touch and drag in the waveform or list.
Tap on the Results Bar Handle (three vertical
dots in border) or anywhere in the border
between the Waveform View and the Results
Bar.
Touch and drag the badge to a new position in
the same bar.
Mouse action
Click the + or - buttons on the Zoom Title bar.
Click the Draw-a-Box button, draw a box around
the waveform area of interest.
Click and drag in the waveform or list.
Click the Results Bar Handle (three vertical dots
in border) or anywhere in the border between the
Waveform View and the Results Bar.
Click and drag the Results Bar divider.
Click and drag the badge to a new position in the
same bar.
Werbung
