Werbung
Section II
Connection to the Electric Supply
It is recommended to connect the pump to the power supply through a dedicated
CAUTION!
safety switch on the main electrical panel of the installation, or in proximity of
the power supply connection point.
WARNING!
The pump must be installed in a way that allows an easy interruption of the
line voltage.
Power supply cord: The correct cable for electrical wiring is a three
wires (Ph+N+Earth) cable. The wire section has to be at least 2 mm
(AWG14).
MS120 Single Stage Rotary Vane Pumps (G2571-64000) User Manual/X3702-90000 (A) 171/188
Technical Information
Section II
5
2
Werbung
