Werbung
Installation
Do not install or use the pump in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk.
During operation, the following environmental conditions must be
respected:
▪
▪
Before starting the pump, fill up with lubricating oil as the pump is delivered
CAUTION!
empty.
Further information for the oil refurbishment and the choice of the
suitable oil, refer to paragraph "Oil change".
It is important that the oil level stays within the range MIN and MAX that is
NOTE
indicated by the level gauge on the side of the pump.
Carry out the first filling up through the plug (E) up to the half of the
sight glass (F) and close the plug (E) (see following figure).
MS120 Single Stage Rotary Vane Pumps (G2571-64000) User Manual/X3702-90000 (A) 148/188
temperature: from +12 °C to +35 °C
relative humidity: 0 – 95% (non-condensing).
Instructions for Use
Use
4
Werbung
