Parkside PMS 160 B2 Originalbetriebsanleitung Seite 5

MULTI-SANDER PMS 160 B2
Introduction
Congratulations on the purchase of your
new appliance. You have selected a
high-quality product. The operating
instructions are part of this product. They contain
important information about safety, usage and
disposal. Before using the product, please famil-
iarise yourself with all operating and safety instruc-
tions. Use the product only as described and for
the specified range of applications. Please also
pass these operating instructions on to any future
owner.
Intended use
Depending on the sandpaper being used, this
appliance is suitable for the dry sanding of wood,
plastic, metal, filler as well as painted surfaces.
The appliance is particularly suitable for corners,
edges and hard-to-reach areas. Any other usage
of or modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage. This
appliance is not intended for commercial use.
Features
1 ON/OFF switch
2 Release button for dust box
3 Dust box
4 Dust bag
5 Reducer for external extraction appliances
6 Adaptor connection
7 Sanding plate
Package contents
1 multi-sander
3 sanding sheet sets (80/120/180 grain)
1 dust box
1 reducer for external extraction appliances
1 set of operating instructions
│ GB │ IE │ NI
■ 2
Technical specifications
Rated power
consumption
Nominal voltage
Rated idle speed
Rated oscillation speed 26,000 rpm
Protection class
Noise and vibration data
Noise measurement value determined in
accordance with EN 62841. The A-rated
noise level of the power tool is typically:
Sound pressure level
Sound power level
Uncertainty
Wear ear muffs!
Rated acceleration, typically:
Hand/arm vibration
Uncertainty
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece being worked, the
vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
160 W
230 V ∼, 50 Hz
n 13,000 rpm
0
II / (double insulation)
L = 88 dB (A)
PA
L = 99 dB (A)
WA
K = 3 dB
a = 5.835 m/s
h
K = 1.5 m/s
PMS 160 B2
2
2