Werbung
Verfügbare Sprachen
Verfügbare Sprachen
◆ Water calculation mode
Disabled
Points
Set point at high ambient temperature
Set point at low ambient temperature
Low ambient temperature
Gradient
PMEN0602 rev.0 - 05/2023
The "Disabled" option sets
the circuit as disabled.
Points is the most versatile
calculation type.
Set 4 points and one vertex
point, to create a line
representing the function that
the air to water heat pump will
use to give the temperature
setting according to the current
ambient temperature.
Use the down arrow key to
select the parameter to modify.
Then modify the value using the
left and right arrow keys.
Vertex offset
High ambient temperature
Configure the same variables as in
the "Points" view, but automatically.
User can only edit the gradient
variable and it will automatically set
the values for the other 4 variables
on the chart.
Use the down arrow key to select
the parameter to modify. Then
modify the value using the left and
right arrow keys.
Vertex offset
Gradient curve
1
45
Werbung
