Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.6.2 Advanced Configuration
• Select the advance configuration for a complete configuration.
• Press OK button.
• Select the controller type:
✓ Unit: the device controls the unit.
✓ Room: the device acts as a room thermostat of a zone.
✓ Unit + Room: the device controls the unit and acts as a room thermostat.
• Select controlled circuits by this device: Room C1, Room C2, Room C1+C2
• Select the favourite action: Eco/Confort, Timer, Night shift.
• Select Enabled or Disabled for European summer time.
• Select Next and press OK button .
• Configure circuit 1 and circuit 2 OTC: Disabled, Points, Gradient, Fix.
• Enable or disable DHW and Swimming Pool.
• Select the heating source: HP only, HP + EH, HP + Boiler.
• Configure electrical heater use: Starting or Backup.
• Configure Boiler type: Parallel or Serial.
PMEN0602 rev.0 - 05/2023
1
21
Werbung
