Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The setting temperature can be modified using the arrows keys over this view.
Pressing the OK button, the following quick actions are shown:
✓ Timer: In this menu, simple timer or schedule timer can be selected and configured.
✓ DHW boost: It activates the DHW heater for an immediate DHW operation
✓ Status: Some working conditions can be consulted.
If anti-legionella operation is working, its icon appears below the setting temperature.
Swimming pool control
It gives information about the swimming pool setting temperature and displays a throughput
icon indicating the percentage of the actual temperature with respect to the setting
temperature.
The setting temperature can be modified using the arrows keys over this view.
Pressing the OK button, the following options are shown:
✓ Timer: In this menu, simple timer or schedule timer can be selected and configured.
✓ Status: Some working conditions can be consulted.
Unit status signals
This part of the screen displays all the notification icons that offer general knowledge on the unit's
situation
Some of these icons can be: Defrost operation, Water pumps, Compressor/s, Boiler working, Tariff
input, Night shift, Test run...
Outdoor temperature / Alarm indication
In normal operation, the outdoor temperature is displayed besides the home icon signal.
In abnormal operation, the alarm icon is indicated with its corresponding alarm code.
Available buttons / Installer mode
It indicates the buttons of the user controller which can be used in this moment.
When Installer mode is enabled, its icon appears on the right side of this view.
PMEN0602 rev.0 - 05/2023
1
33
Werbung
