Hitachi PC-ARFH1E Betriebshandbuch Und Installationsanleitung Seite 29

• Select Yes if an electrical backup heater is installed.
• Press OK button.
• Select the bivalent point for boiler or electric backup heater (from -20 ºC to 20 ºC).
• Press OK button.
• Select the type of room thermostat installed in circuit 1 or 2 (depending on the previous
setting): None, wired or wireless.
• Repeat this step in case of circuit 2.
• Press OK button.
• Configuration assistant is completed.
• Press OK button to go to the main screen.
PMEN0602 rev.0 - 05/2023




1
20