Werbung
Verfügbare Sprachen
Verfügbare Sprachen
◆ Setting of Schedule timer
Setting of temperature, operation mode (ECO or Comfort) or change of operation state from ON to
OFF for a defined period, after which operation returns to the previous settings. Manual operation
of the unit controller has priority over schedule settings.
Timer type: Selection of the timer
type
• Disable
• Simple timer
• Schedule
Timer configuration: New
screen appears to configure
a schedule timer. See
explanation below.
Copy to circuit 2:
It is possible to copy the schedule
timer to circuit 2.
Pressing the OK button with "Timer Configuration" being selected displays the detailed schedule
screen. The active schedule timers are shown in a weekly calendar.
Up to five timer events can be defined for each weekday, and these can be used for turning the
operation ON or OFF, to change the setting temperature or the working mode (Eco/Comfort).
Pressing the OK key with one of the weekdays being selected in the weekly calendar screen
displays the detailed schedule for the weekday.
Timer configuration as Setting temperature
Pressing the "Menu" button during the edition of the timer events for a given weekday displays a
menu to copy the daily pattern to other weekdays or to suppress the selected timer event.
PMEN0602 rev.0 - 05/2023
Change Mode: Selection of the working
mode (Only for Circuit 1 or Circuit 2). In
Water mode only when circuit is Fix.
• Mode (uses Eco/Comfort configurations)
• Setting temperature.
Reset configuration:
Press OK button to reset scheduled
timers.
Timer configuration as Mode
1
41
Werbung
