Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.7.2 Comprehensive view
Time and date
The current time/date information is displayed. This information can be changed on the
configuration menu
.
Operation mode (Heating/Cooling/Auto)
This icon shows the unit's mode of operation status. It has to be edited by pressing the OK button,
and it can be switched between Heating, Cooling and Auto mode. (If available option).
Control of circuits 1 and 2
It displays the setting temperature calculated for each circuit and a throughput icon indicating the
percentage of the actual temperature with respect to the setting temperature. It can also show
the ECO mode and timer activation if they are enabled.
The setting temperature can be modified using the arrows keys over this view (if water calculation
mode is set as fix).
Pressing the OK button, the following quick actions are shown:
✓ Timer: In this menu, simple timer or schedule timer can be selected and configured.
✓ OTC: OTC Setting temperature (User can only refer to the OTC mode and its setting
temperature value)
✓ ECO/Comfort: Selection between ECO and Comfort mode.
✓ Status: Some working conditions can be consulted.
DHW control
It displays the setting temperature for DHW and a throughput icon indicating the percentage of
the actual temperature with respect to the setting temperature. It can also show the operation of
the electrical heater of the DHW, the timer activation and the DHW boost if they are enabled.
PMEN0602 rev.0 - 05/2023
1
32
Werbung
