Safety - Simco-Ion IML Bedienungsanleitung

3 Safety

The following safety instructions should be followed in order to prevent injuries and damage
to objects or the IML Spider charging system itself.
Danger:
- Ensure proper grounding of the high voltage generator. Grounding is required for proper and
safe operation and to prevent electric shock when touched.
- Turn the power off before any work on the equipment is started to prevent electric shock.
- Touching high voltage parts will result in an electric shock. An electric shock can cause a
shock reaction, including from areas with contact protected high voltage.
- High voltage electricity can be dangerous for people with pacemakers.
Warning:
- Electrical installation and repairs must be performed by skilled electricians only.
- The IML Spider charging system should not be used in hazardous environments with a risk of
fire or explosion.
- Metal parts in the vicinity of the charging electrodes, including machine frames must be
earthed to prevent unwanted charging of metal parts.
- The IML Spider charging system is intended solely for the electrostatic charging of non-
conductive material used in combination with the IML Spider electrode or a customized
charging electrode. Any other use is not recommended.
Note:
- The IML Spider charging system loses its guarantee if any changes, modifications, etc. are
made or non-original parts are used during repair without prior written approval.
IMLSpider&JunctionBlock_UM_9752098610_NL_D_GB_F_V1_0 34