EN
Removing the Battery
Please Note!
■
The device must not be connected to
the mains power while the battery is
being removed / inserted.
■
The battery must not be taken apart,
thrown into a fire, immersed in liquids
or short-circuited.
■
You should never open the battery!
To remove the battery from the device,
proceed as follows:
TECHNICAL DATA
Article number:
ID of operating instructions:
Device
Model number:
Voltage supply:
Power:
Battery charge time:
Battery operating time:
Protection class:
Mains adapter required:
All rights reserved.
16
12572_Inlay_DE-EN-FR-NL-ES-IT_A5_V1.indb 16
12572_Inlay_DE-EN-FR-NL-ES-IT_A5_V1.indb 16
1. Press the release button (3) and take the
collecting container (8) off the motor
unit (5).
2. Undo the six screws on the motor unit
with a screwdriver (Picture B).
3. Detach the two halves of the housing
(Picture C).
4. Take out the battery pack (Picture D).
5. Disconnect the cables with a pair of
pliers.
6. Dispose of the battery pack in accordance
with the statutory regulations governing
the disposal of batteries.
12572
Z 12572 M DS V1 0523 as
YF131B
7.4 V DC (Li-ion battery; 2 000 mAh)
67 W
4 hours
approx. 18 minutes (with fully charged battery)
III
5 V and ≥1000 mA
08.05.2023 10:52:17
08.05.2023 10:52:17