Cleaning Under Running Water - Silvercrest IAN 108312 Bedienungsanleitung

Cleaning under running water

1) Press the release button 4 so that the cutting unit 2 pops open.
2) Overstretch the cutting unit 2 a little so it can be pulled upwards
and off .
3) Hold the cutting unit 2 under the running water so that the water
fl ows through the shaving heads from the inside to the outside.
CAUTION! MATERIAL DAMAGE!
Hold only the cutting unit 2 under running water! The shaver
handset can be damaged irreparably if it is held under running
water.
4) Allow the cutting unit 2 to dry.
5) Replace the cutting unit 2 on the shaver. Ensure that it snaps
into place and is seated fi rmly:
SRR 3.7 B2
GB
57