Sunny Health & Fitness SF-RBE4886 SMART Bedienungsanleitung Seite 19

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
#83 M5×10 4PCS
#25 M5×15 2PCS
#74 D5×Φ10×1 2PCS
#129 S13,S14,S15 1PC
STEP 9:
Remove 4 Screws (No. 83) from the Meter
(No. 14) with Spanner (No. 129).
Connect the Pulse Extension Wire 2 (No. 81)
with Meter Wire A (No. 14a) and connect
Sensor Extension Wire 2 (No. 80) with Meter
Wire B (No. 14b). Insert all the wires into the
tube of Handlebar Post (No. 4). Then attach
the Meter (No. 14) to the bracket of Handlebar
Post (No. 4) with 4 Screws (No. 83) that were
just removed. Tighten and secure with the
Spanner (No. 129).
NOTE: Do not cut or pinch any wires when
attaching the Meter (No. 14).
Remove 2 Screws (No. 25) and 2 Flat
Washers (No. 74) from the Handlebar Post
(No. 4) using Spanner (No. 129). Then attach
the Bottle Holder (No. 39) to the Handlebar
Post (No. 4) with 2 Screws (No. 25) and 2 Flat
Washers (No. 74) that were just removed.
Tighten and secure with the Spanner (No.
129).
Insert the jack from Adaptor (No. 84) to
adaptor input on the front of Main Frame (No.
1), then plug the Adaptor (No. 84) into an
outlet.
The assembly is now complete!
18