Sunny Health & Fitness SF-RBE4886 SMART Bedienungsanleitung Seite 14

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
#20 M8×16 8PCS
#37 D8 8PCS
#35 D8×Φ16×1.5 8PCS
#73 1PC
#132 S6 1PC
#20 M8×16 6PCS
#37 D8 6PCS
#36 Φ20×D8.5×R30 6PCS
#132 S6 1PC
ASSEMBLY INSTRUCTIONS
STEP 1:
Remove 2 Shipping Tubes (No. 57), 8 Screws
(No. 20), 8 Spring Washers (No. 37) and 8 Flat
Washers (No. 35) from the Main Frame (No. 1)
using Allen Wrench (No. 132).
NOTE: You can discard the 2 Shipping Tubes
(No. 57) or save them to repackage the item in
the future.
Attach the Front Stabilizer (No. 10) and Rear
Stabilizer (No. 11) to the Main Frame (No. 1)
with 8 Screws (No. 20), 8 Spring Washers (No.
37) and 8 Flat Washers (No. 35) that were just
removed. Tighten and secure with Allen
Wrench (No. 132).
Attach the Adjustable Pad (No. 73) to the Main
Frame (No. 1).
STEP 2:
Remove 6 Screws (No. 20), 6 Spring Washers
(No. 37) and 6 Arc Washers (No. 36) from the
Main Frame (No. 1) using Allen Wrench (No.
132).
Connect the Sensor Extension Wire 2 (No. 80)
with Sensor Extension Wire 1 (No. 79) and
connect Pulse Extension Wire 2 (No. 81) with
Pulse Extension Wire 1 (No. 78).
Attach the Handlebar Post (No. 4) to the Main
Frame (No. 1) with 6 Screws (No. 20), 6 Spring
Washers (No. 37) and 6 Arc Washers (No. 36)
that were just removed. Tighten and secure with
Allen Wrench (No. 132).
NOTE: Do not cut or pinch any wires when
attaching the Handlebar Post (No. 4).
13