Sunny Health & Fitness SF-RBE4886 SMART Bedienungsanleitung Seite 17

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
#15 M8×50 4PCS
#35 D8×Φ16×1.5 4PCS
#30 M8 4PCS
#23 ST4.2×18 4PCS
#24 ST3.5×12 2PCS
#129 S13,S14,S15 2PCS
#130 S17,S19 1PC
STEP 6:
First, fasten 2 Hex Screws (No. 26) from
STEP 3 tightly using 2 Spanners (No. 129).
Then cover with 2 Caps (No. 50).
Second, fasten 2 Nylon Nuts (No. 28) from
STEP 4 using Open End Wrench (No. 130).
NOTE: Ensure that all bolts and washers are
in place and partially threaded in before
completely tightening them.
Remove 4 Screws (No. 23) from 2 Swing
Bars (No. 19L/R) and remove 2 Screws (No.
24) from 2 pairs of Protective Covers (No.
51a/b) using Spanner (No. 129).
Attach the 2 pairs of Protective Covers (No.
51a/b) to the 2 joints of the 2 Swing Bars (No.
19L/R) and 2 Pedal Support Tubes (No.
2L/R) with 4 Screws (No. 23) and 2 Screws
(No. 24) that were just removed using
Spanner (No. 129).
Insert 2 Pedals (No. 49L/R) through 2 Pedal
Straps (No. 3), then attach 2 Pedals (No.
49L/R) to the 2 Pedal Support Tubes (No.
2L/R) with 4 Hex Bolts (No. 15), 4 Flat
Washers (No. 35) and 4 Nylon Nuts (No. 30)
using Spanner (No. 129).
NOTE: The Left Pedal (No. 49L) is labeled L,
while the Right Pedal (No. 49R) is labeled R.
16