Sunny Health & Fitness SF-RBE4886 SMART Bedienungsanleitung Seite 18

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
#21 M8×20 4PCS
#37 D8 4PCS
#35 D8×Φ16×1.5 6PCS
#16 M8×L45 2PCS
#29 M8 2PCS
#18 M6×10 2PCS
#131 S5 1PC
#132 S6 1PC
#129 S13,S14,S15 1PC
#17 M6×40 4PCS
#34 D6×Φ12×1.2 4PCS
#20 M8×16 4PCS
#35 D8×Φ16×1.5 4PCS
#134 ST4.2×13 1PC
#25 M5×15 2PCS
STEP 7:
Remove 4 Screws (No. 21), 4 Spring
Washers (No. 37) and 4 Flat Washers (No.
35) from the Seat Rail (No. 7) with Allen
Wrench (No. 132). Then attach the Seat Rail
(No. 7) to the Main Frame (No. 1) with 4
Screws (No. 21), 4 Spring Washers (No. 37)
and 4 Flat Washers (No. 35) that were just
removed using Allen Wrench (No. 132).
Remove the 2 Screws (No. 18) from the
Adjustable Handle (No. 13) using Allen
Wrench (No. 131). Then attach the
Adjustable Handle (No. 13) to the Axle (No.
9) with 2 Screws (No. 18) that were just
removed using Allen Wrench (No. 131).
Attach the Rear Handlebar (No. 12) to the
Seat Support (No. 8) with 2 Carriage Bolts
(No. 16), 2 Flat Washers (No. 35) and 2 Cap
Nuts (No. 29) using Spanner (No. 129).
Connect the Pulse Wire (No. 77) with the
Pulse Extension Wire 1 (No. 78).
STEP 8:
#131 S5 1PC
Remove 2 Screws (No. 25) from the Main
#132 S6 1PC
Frame (No. 1) using Spanner (No. 129).
Then attach 2 Seat Rail Covers (No. 48) to
#129 S13,S14,S15 1PC
the Main Frame (No. 1) with 2 Screws (No.
25) that were just removed using Spanner
(No. 129).
Attach the Seat (No. 52) to the Seat Support
(No. 8) with 4 Screws (No. 20) and 4 Flat
Washers (No. 35) using Allen Wrench (No.
132).
Attach the Backrest (No. 53) to the Seat
Support (No. 8) with 4 Bolts (No. 17) and 4
Flat Washers (No. 34). Tighten and secure
with Allen Wrench (No. 131).
Remove the Screw (No. 134) from the Seat
Support (No. 8) with Spanner (No. 129).
Then attach the Backrest Cover (No. 54) to
the Seat Support (No. 8) with the Screw (No.
134) that was just removed. Tighten and
secure with Spanner (No. 129).
17