OHAUS Scout STX Serie Bedienungsanleitung Seite 39

STX
Note: If security switch is set to locked, the print Output-Stable setting is not reset.
A TAB delimiter is added between each data output.
5.2.6 GLP and GMP Data
Enter this menu to set the Good laboratory Practices (GLP) data.
Header Balance Name
GLP Data Sub-menu
Header
Enables the printing of GLP headings. There are up to 5 headings
available.
Balance Name
Set the balance identification.
User Name
Set the user identification.
Project Name
Enter this menu to set the Project identification.
Footer
Enables the printing of GLP headings. There are 2 headings available.
Alternate Tare Command
Set the alternate command character for Tare.
Settings of A to Z are available. The default setting is empty, except
P&Z.
Alternate Zero Command
Set the alternate command character for Zero.
Settings of A to Z are available. The default setting is empty, except
P&T.
Print Settings Menu:
User Name
Alphanumeric settings up to 25 characters are
available for each Header setting. .
Alphanumeric settings up to 25 characters are available.
The default setting is blank.
Alphanumeric settings up to 25 characters are available.
The default setting is Scout.
Alphanumeric settings up to 25 characters are available.
The default setting is blank.
Alphanumeric settings up to 25 characters are
available for each Header setting. .
Project Name Footer
EN-35