OHAUS Scout STX Serie Bedienungsanleitung Seite 38

EN-34
User Name
Set the status.
OFF = the User Name is not
printed.
ON = the User Name is printed.
User Name:
XXXXXXXXXXXX
Project Name
Set the status.
OFF = the Project Name is not
printed.
ON = the Project Name is
printed.
Project Name:
XXXXXXXXXXXX
Application Name
Set the status.
OFF = the Application Name is not
printed.
ON = the Application Name is
printed.
Application Name:
XXXXXXXXXXXX
Feed
Set the paper feed.
1 LINE
4 LINE
Format
Set the printing format.
SINGLE LINE
MULTIPLE LINES
Alt Command (Alternate Print Command)
= move the paper up one line after printing.
= move the paper up four lines after printing.
= a single line printout is generated. A TAB
delimiter is added between each data output.
= a multiple line printout is generated. A CRLF is
added after each data output.
Alternate Print Command
Set the alternate command character for Print.
Settings of A to Z are available. The default setting is empy, except
P.T or Z.
Signature Line
Set the status.
OFF = the Signature Line is not
printed.
ON = the Signature Line is printed.
Signature:__________________
Verified by: _______________
Note: "Verified by" is to be signed by an
officer from local metrological regulation
office to assert that the weighing and/or
calibration results are in accordance with
regulations.
Footer
Set the status.
OFF = the user defined footer is not
printed.
ON = the user defined footer is
printed.
USER DEFINED TEXT
USER DEFINED TEXT
USER DEFINED TEXT
USER DEFINED TEXT
USER DEFINED TEXT
STX