OHAUS Scout STX Serie Bedienungsanleitung Seite 36

EN-32
Print Options*
Set the printing criteria.
Note: If language selection is set to Chinese, Japanese or Korean, these options
shall match the actual peripheral device.
Auto Print
Set the automatic printing functionality.
When ON Stability is selected, set the conditions for printing.
When INTERVAL is selected, set the time interval using the numeric
keypad.
Print Content
Enter this sub-menu to define the content of the printed data.
See details below:
OFF = Headers will be printed for every print requirement
ON = Headers will be printed once a day
Printer = Print data to a printer
PC = Print data to a PC
OFF = disabled
ON Stability = printing occurs each time the stability criteria are
Interval (seconds) = printing occurs at the defined time interval.
Continuous = printing occurs continuously.
Load = Prints when the displayed load is stable.
Load and Zero = Prints when the displayed load or zero reading is
Settings of 1 to 3600 seconds are available.
met.
stable.
STX