OHAUS Scout STX Serie Bedienungsanleitung Seite 27

STX
Weighing Units: Select the displayed unit for
gross and tare.
Print Settings: To view or adjust the print
settings
4.9.2 Enter Molar Mass
Press Molar Mass, and use the numeric
keypad to enter the required Molar Mass value
of the substance, and then press Save.
4.9.3 Calculate Molarity
The Molarity is only calculated when the Liquid
Volume is set up. If Liquid Volume is set, the
Molarity value can be seen at the bottom right
window block.
4.10 Additional Features
4.10.1 Weigh Below
The Scout Balance is equipped with a weigh below hook for weighing below the balance.
The weigh below hook is located at the reverse side of the battery cover as shown below.
To use this feature, remove the red protective cover underneath for the weigh below opening.
Attention: Before turning the balance over, remove the Pan and Pan
Support (if present), and turn the transportation lock to "locked" position to
prevent damage.
Weigh below opening
Weigh Below Hook Weigh Below Hook installed
EN-23