OHAUS Scout STX Serie Bedienungsanleitung Seite 12

EN-8
The PARTS COUNTING Standard Home screen:
4.2.1 Item Settings
To view or adjust the current settings, touch the Item Settings button:
Touch the Item Settings button. The Settings
screen appears.
Sample Name: Enter a sample name
with the alphanumerical keypad and then
press Save to store the name and return
to Item Settings screen as shown to the
right.
Auto Optimization: It re-calculates the
piece weight automatically to improve
counting accuracy as parts are added.
By default Auto Optimization is Off.
Weighing Units: Select the displayed
unit.
Print Settings: To view or adjust the print
settings.
4.2.2 APW/Samples
Enter to set APW and Sample size in pieces by
the numerical keypad.
Establish an Average Piece Weight (APW)
Each time a new type of part is counted, the
nominal weight of one piece (Average Piece
Weight or APW) must be established using a
small quantity of pieces. This APW is stored until
replaced by another APW.
There are two methods to establish the APW
value: APW and Samples.
Main Display Line
Reference Fields
Application Buttons
STX
Application
Icon