OHAUS Scout STX Serie Bedienungsanleitung Seite 23

STX
4.6.1 Item Settings
To view or adjust the current settings
Touch the Item Settings button. The Settings
screen appears.
Sample Name: Enter a sample name.
Weighing Units: Select the displayed unit.
Print Settings: To view or adjust the print
settings
4.6.2 Limits
To view or adjust the current settings
Touch the Limits button. The limits settings
screen appears.
The check limit values are displayed in the
settings screen.
To set the Over Limit value, touch the Over
Limit button and then enter the desired limit
weight.
To set the Under Limit value, touch the Under
Limit button and then enter the desired limit
weight.
When finished, press Exit to return to
application home screen.
Positive Check
Positive check is used to determine when the material added to the balance is within the target
range. In this case the UNDER and OVER limits must be positive values. (The OVER limit must
be greater than the UNDER limit.)
Add material to the balance until it is within the ACCEPT range.
Negative Check
Negative check is used to determine when the material removed from the balance is within the
target range. In this case the UNDER and OVER limits are both negative values.
(The UNDER limit must be greater than the OVER limit.)
Place the item to be weighed on the balance and press TARE.
Remove a portion of the item until it is within the ACCEPT range.
Zero Check
Zero check is used when comparing subsequent samples to an initial reference sample. In this
case, the UNDER limit must be a negative value and the OVER limit must be a positive value.
Place the reference item on the balance and press TARE. Remove the reference sample and
place the item to be compared on the balance to determine if it is within the ACCEPT range.
EN-19