Assembling The Contain-It Plus Ball Valve Type 546 Pro - GF 546 Pro Betriebsanleitung

CONTAIN-IT Plus Ball Valve Type 546 Pro
4.5

Assembling the CONTAIN-IT Plus Ball Valve Type 546 Pro

Procedure
1. Move the protective housing over the ball valve.
2. Plug the stem through the hole in the protective housing onto
the ball valve.
3. Please make sure that the stem is in the right position. The-
refore please consider the outline of the stem and of the ball
valve.
4. Check if the stem is flush with the bottom of the connecting
element.
16
Operating Instructions