JVC BR-S605E Bedienungsanleitung Seite 17

in any mode.
61 | Direct Search ON/OFF switch
ON
Usually set to ON.
OFF: Dial Search operates
only from the Still mode.
62 | Backspace editing ON/OFF
ON
Usually set to ON.
switch
.63 | Factory use only
OFF | Keep set to OFF.
64 | Auto Rewind ON/OFF switch
ON
Usually set to ON.
65 | Factory use only
ON
Keep set to ON.
66 | REC Inhibit switch
OFF | Set to ON to prevent
recording. When using the
BR-S605E exclusively as a
player, set to ON to prevent
mishaps.
67 | Factory use only
OFF | KeepsettoOFF.
.
| 6s | Factory use only
| on | Keep set to ON.
Factory use only
OFF | Keep set to OFF.
ON: Slow motion is obtained
by combining normal play
and still, permitting noiseless
slow motion.
OFF: Slow motion is
obtained by continuously
scanning the tape at the
specified slow speed,
therefore noise bars will be
visible.
Select as required. To reset
this switch, remove the
cassette and engage the
Stop mode. Available slow
speeds differ slightly
according to the selected
mode. See the chart on the
right.
Usually set to OFF.
ON: The Function Select (2)
mode can be accessed
directly from the Function
Select (1) mode by pressing
the MENU button.
ibi OFF
74 | Full Repeat recording ON/OFF
OFF | Usually set to OFF.
switch
5 | CTL pulse output select switch
OFF
Step slow (ON)/Continuous slow
(OFF) switch
71 | Function Select (2) mode
ON/OFF switch
Usually set to OFF.
76 | Full-load Stop select switch
OFF | Usually set to OFF.
ON: Tape remains loaded in
STOP mode (Standby).
@ Press the EJECT button to eject the cassette.
@ Press the +SHIFT and —-SHIFT buttons to locate the desired
function (see Memory Switch Menu chart below).
@ Press the SET button to select ON/OFF.
@ To return to the counter display, press the MENU button.
Slow speeds in Step Slow and Continuous Slow modes
Step Slow: +/—-1/6, 1/18, 1/30
Continuous Slow: +/— 1/2, 1/8, 1/23
When the BR-S605E is controlled via the RS-232C board, the
slow speeds are locked to those available with the RS-232C.
Depending on the setting of Memory Switch 70, these also
differ slightly.
Step Siow | Data_| Speed
-10 % Bump
3c +10 % Bump
on eee
*Actual tape speed is 1/23 normal.
Notes:
@ Normal audio and time code signals are output at all search
speeds including still and slow motion in the Continuous
Slow mode. If the STILL button is pressed in the Still mode,
the picture will advance one frame at a time.
© Vertical jitter may be seen in the Step Slow mode.