Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AUDIO
DUBBING
of OnOIGH
£
@ Set the MAINS POWER switch on the rear panel to ON.
@ Set the AUDIO MONITOR SELECT switch to NORMAL.
@ Set the OPERATE switch on the front panel to ON.
@ Adjust the normal audio channel-2 level by turning the
© Insert a video cassette (with safety tab in place) in the
NORMAL(AUD-2/R) level control.
cassette loading slot.
Note:
@ Set the METER SELECT switch to AUD-2/R.
@ Make sure that Memory Switch 43 is OFF, otherwise Audio-2
will be muted.
gs
vied
@ Press the AUD DUB and PLAY buttons simultaneously in
Note:
the Play or Still mode.
@ if the Audio Dub Pause mode continues for about 5 minutes,
®@ The Audio Dub mode will be engaged. Both the AUD DUB
20 seconds, the tape unloads and the Stop mode
is
and PLAY LEDs will light.
engaged.
® To stop audio dubbing temporarily in the Audio Dub
Pause mode, press the PAUSE/STILL button. To restart
audio dubbing, press the PLAY button.
@ Press the STOP button to end audio dubbing.
=—13-—
Werbung
