Philips AVENT Premium SCF396 Bedienungsanleitung Seite 8

English
8
-
Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from
heating up or releasing toxic or hazardous substances. Do not short-circuit, overcharge or reverse charge
batteries.
-
If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse
well with water and seek medical care.
Caution
Cautions to prevent damage to and malfunctioning of the breast pump:
-
Prevent the adapter and motor unit from coming into contact with water.
-
Keep the adapter and the silicone tubes away from heated surfaces to avoid overheating and
deformation of these parts.
Before first use
Disassemble, clean and disinfect all parts that come into contact with breast milk before you use the breast
pump for the first time and after every use.
Fully charge the device before you use it for the first time or after a long period of non-use.
Cleaning and disinfecting
Note: The figure numbers mentioned below refer to the numbers of the figures on the back foldout page
of this user manual.
-
Clean and disinfect the parts that come into contact with the breast (Fig. 2) and breast milk (Fig. 3)
before first use and after every use.
-
Clean the parts that do not come into contact with the breast and breast milk when needed (Fig. 4).
Wipe the parts with a clean, damp cloth with water and mild detergent.
Step 1: Disassembling
Disassemble the breast pump kit (Fig. A2) and the bottle (Fig. A3) completely. Also remove the white valve
from the pump body (Fig. B3).
Step 2: Cleaning
The parts that come into contact with the breast and breast milk can be cleaned manually or in the
dishwasher.
Warning: Do not use antibacterial or abrasive cleaning agents to clean the breast pump
parts as this may cause damage.
Caution: Never put the motor unit or the adapter in water or in a dishwasher, as this
causes permanent damage to these parts.
Caution: Be careful when you remove and clean the white valve. If it gets damaged,
your breast pump does not function properly. To remove the white valve, gently pull at