Philips AVENT Premium SCF396 Bedienungsanleitung Seite 12

English
12
Pumping instructions
Warning: Always switch off the breast pump before you remove the pump body from
your breast, in order to release the vacuum.
Warning: Do not continue pumping for more than five minutes at a time if you do not
succeed in expressing any milk. Try to express at another time during the day.
Warning: If the process becomes very uncomfortable or painful, stop using the breast
pump and consult your healthcare professional.
1 Wash your hands thoroughly with soap and water and make sure that your breast is clean.
2 Place the breast pump kit onto your breast. Make sure that you center your nipple (Fig. 16).
3 Press and hold the on/off button until the device switches on (Fig. 5). The indicator lights go on to
indicate that the device is in stimulation mode.
4 The breast pump starts in stimulation mode and slowly increases its vacuum to the last used stimulation
suction level (or level 5 when used for the first time) (Fig. 17).
5 The display shows the running time (Fig. 18).
6 Use the 'level up' and 'level down' buttons to change the suction level to your preference (Fig. 19).
7 After 90 seconds the breast pump will switch smoothly to expression mode and slowly increase its
vacuum to the last used expression suction level (or level 11 when used for the first time) (Fig. 20).
8 If your milk starts flowing earlier or if you want to switch from expression to stimulation mode, you can
switch modes with the mode selection button (Fig. 21).
9 Briefly press the on/off button if you want to pause (Fig. 22). To continue, briefly press the on/off button
again.
10 Press and hold the on/off button to switch off (Fig. 5).
11 Unplug the adapter from the wall socket and pull the small plug out of the motor unit.
After use
Warning: Only store breast milk expressed with a clean and disinfected breast pump.
If you intend to feed your baby with the expressed breast milk within 4 days, you can store the breast milk in
the refrigerator in an assembled Philips Avent bottle or storage cup. Otherwise, you can store breast milk in
the freezer for up to 6 months.
1 To store the breast milk: close the bottle with the sealing disc and screw ring (Fig. 23).
2 To prepare the bottle for feeding your baby: place a teat in a screw ring and screw the assembled screw
ring onto the bottle. Seal the teat with the bottle cap (Fig. 24).
3 Disassemble and clean all parts that have been in contact with breast milk (see 'Cleaning and
disinfecting').
Warning: Refrigerate or freeze expressed milk immediately or keep it at a temperature
of 16-29 °C (60-85 °F) for a maximum of 4 hours before you feed your baby. Never
refreeze thawed breast milk to avoid a decrease in milk quality. Never add fresh breast
milk to frozen breast milk to avoid a decrease in milk quality and unintended thawing of
the frozen milk.