SPORTSTECH F15 Handbuch Seite 25

17
19
5
Main Control Cable Socket
70
20
84
Step 2
A.Remove the four Head Hex Socket Screws (17) in the end of the Left Stand Tube and Right Stand Tube.
B.Attach the Handlebar (70) onto both ends of the Stand Tube, tighten the screws with the Allen Key
provided.
C. Connect the wire that comes from the Computer Console (5) to the Main Control Cable Socket from the right
handlebar support of the Right Stand Tube .
D.Install both Handlebar Covers (19) onto the Handlebar (70).
5
9
54
Step 3
A.Turn the Computer Console (5) up or down to align the Socket Head Screw hole.
B. Lock the Computer Console (5) in place by tightening the Socket Head Screw (9).