Environmental Protection; Standard Spare Parts; Declaration Of Conformity - Stihl Rme 339 Gebrauchsanleitung

– damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots),
– corrosion and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
– damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.

15. Environmental protection

Lawn clippings should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced from
recyclable materials and must be disposed
of accordingly.
By disposing of materials separately and in
an environmentally friendly manner,
recyclable waste can be re-used. For this
reason, the machine should be disposed
of for recycling at the end of its useful life.
Improper disposal may be harmful to
health and pollute the environment. Pay
particular attention to the information in the
section "Disposal" during disposal. (
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.

16. Standard spare parts

Mowing blade:
6320 702 0100
44
Blade fastening screw:
6310 760 2801
The blade fastening screw must be
renewed each time the blade is
replaced. Spare parts are available
from a STIHL specialist dealer.

17. Declaration of conformity

17.1 EU declaration of conformity –
STIHL RME 339.0, RME 339.0 C lawn
mower
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: electric lawn mower
– manufacturer's brand: STIHL
– type: RME 339.0, RME 339.0 C
– cutting width: 37 cm
– serial number: 6320
complies with the relevant provisions of
Directives 2000/14/EC, 2006/42/EC,
2014/30/EU and 2011/65/EU and has
been developed and manufactured in
accordance with the versions of the
4.9)
following standards valid on the date of
manufacture: EN 60335-1, EN 60335-2-
77, EN 55014-1, EN 55014-2, EN 61000-
3-2, EN 61000-3-3 (where applicable).
Approved body involved:
TÜV Rheinland LGA Products GmbH
Tillystrasse 2
90431 Nuremberg, Germany
The measured and guaranteed sound
power levels were determined in
accordance with Directive 2000/14/EC,
Appendix VIII.
– Measured sound power level:
92,5 dB(A)
– Guaranteed sound power level:
93 dB(A)
The technical documents are stored at
STIHL Tirol GmbH.
The year of manufacture and machine
number are indicated on the lawn mower.
Langkampfen, 02.11.2020
STIHL Tirol GmbH
p.p.
Matthias Fleischer, Head of Research and
Development Division
p.p.
Sven Zimmermann, Head of Quality
Division
17.2 UKCA-Declaration of Conformity
STIHL RME 339.0 Lawn Mower
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
0478 121 9919 C - EN