Werbung
Verfügbare Sprachen
Verfügbare Sprachen
become illegible, check the entire machine
for wear and damage. Replace all worn or
damaged parts.
Any machine faults must be completely
remedied prior to storage.
Note the following points when storing the
lawn mower for long periods (winter
break):
● Clean all external parts of the machine
with care.
● Thoroughly lubricate/grease all moving
parts.
13. Transport
13.1 Carrying and securing lawn
mower
Risk of injury:
Observe the safety instructions in
the section "For your safety" (
Carrying the machine:
● Only lift the lawn mower by the
transport handles (1, 2). Always ensure
sufficient distance between the mowing
blade and your body, particularly your
feet and legs.
● Carry the lawn mower using both
hands, with one hand at the upper
transport handle (2) and the other hand
at the lower transport handle (1),
or
● carry the lawn mower with one hand at
the upper transport handle (2).
0478 121 9919 C - EN
Securing the machine (lashing):
● Secure the lawn mower on the load
floor using suitable fastening materials.
● Attach ropes or straps at the handles
(1, 2).
14. Minimising wear and
preventing damage
Important information on maintenance
and care of the product group
Lawn mower, manually operated and
mains-powered (STIHL RME)
STIHL assumes no liability for material or
personal damage caused by the non-
observance of information contained in the
operating instructions, in particular with
regard to safety, operation and
maintenance, or which arise through the
19
use of unauthorised attachment or spare
parts.
Please always observe the following
important information for the prevention of
4.).
damage or excessive wear to your STIHL
machine:
1. Wearing parts
Some parts of the STIHL machine are
subject to normal wear even when used
properly and must be replaced in due time
depending on type and duration of use.
These include:
– blades
2. Compliance with the information in
this instruction manual
The STIHL machine must be used,
maintained and stored with the care
described in this instruction manual. Any
damage caused by non-compliance with
the safety, operating and maintenance
instructions is the sole responsibility of the
user.
This applies in particular to:
– inadequately dimensioned power
cables (cross section),
– Incorrect electrical connection
(voltage),
– Product modifications not approved by
STIHL.
– The use of tools or accessories which
are not approved or suitable for the
machine, or are of inferior quality.
– Improper use of the product.
– Use of the product for sporting or
competitive events.
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
43
Werbung
