Sungrow SHS3.ORS Kurzanleitung Zur Installation Seite 36

Label
Meter (A2, 82)
CAN (H, L)
RS485 (A1, 81)
RSD (RSD-I, RSD-2)
Enable (EN H, EN G)
DRM (Dl/5, D2/6, D3/7, D4/8, R, C)
DO (COM, NO)
RJ45-CAN (H, L)
Take Smart Energy Meter connection as an example.
O
For single-strand wire
ø4 8 _6 Omm
D
c
A: 35..45 mm C-0.5...1
B: 7 ..10mm D s2.8 mm
O
05 0-6ON.m
Description
For Smart Energy Meter
For Li-ion battery communication
Detail battery information refer to inverter user manual.
For inverter daisy chain (Reserved)
For Li-ion battery communication
Detail
Reserved (Detail availability
Enable the battery with a voltage of 12V.
Detail power specification refer to inverter user manual.
For external Demand Response Enabling Device
For Ripple Control Receiver
Reserved (Detail availability
For Li-ion battery communication
Detail battery information refer to inverter user manual.
For multi-strand
ø4.8...6.Omm
A: 35. 45 mm
.omm 2
O
O
35mm
information refer to inverter
contact SUNGROW)
contact SUNGROW)
wire
c
C=05_ 1
D s2 8 mm
RS485A
35
via CAN protocol
via RS485 protocol
user manual.
via CAN protocol
O
C 0 5N m
Click
R 485B