Herunterladen Diese Seite drucken

Sungrow SHS3.ORS Kurzanleitung Zur Installation Seite 2

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
EN
1. Contents may be periodically
is subject to change without notice. In no case shall this guide substitute for the user manual or related
notes
on the device
2. Make sure to read over, fully understand
other related regulations before installing the equipment.
the website at http://support.sungrowpower.com/;
side of the equipment or the back cover of this guide
3. All operations can be performed only by qualified personnel, that must be trained for installation
commissioning
of electrical system, as well as dealing with hazards, have knowledge of the manual and of
the loca regulations and directives
4 Before installation,
check that the package contents are intact and complete compared to the packing list
Contact SUNGROW
5. The cable used must be intact and well insulated. Operation personnel must wear proper personal
protective equipment (PPE) all the time.
6. Any violation could result in personal death or injury or device damage, and will void the warranty.
Safety
The inverter has been designed and tested strictly according to international
safety instructions carefully prior to any work and observe them at all times when working on or with the
inverter. Incorrect operation or work may cause:
• injury or death to the operator or a third party;
damage to the inverter or other properties
Please follow the safety instructions
A
DANGER
Lethal voltage!
PV strings will produce electrical power when exposed to sunlight and can cause a lethal voltage and an
electric
shock
Only qualified personnel can perform the wiring of the PV panels
A
NOTICE
Danger to life from electric shock due to lethal voltage!
All electrical
connections
• Only with the permission of the local utility grid company, the inverter can be connected to the utility grid
Inverter
The warning label on the inverter body are as follows
AC
P
10 min
updated or revised due to product development.
and strictly follow the detailed instructions
or the distributor in case of any damaged or missing components.
related to the PV strings and the utility grid
must
be in accordance
Disconnect the inverter from all the external power sources before maintenance!
Do not touch live parts for 10 minutes after disconnection
Burn danger due to hot surface that may exceed 60 oc
The user manual can be downloaded
or it can be obtained by scanning the QR code on the
with
local
and
national
The information
in this guide
of the user manual and
by visiting
and
safety regulations.
Read all
standards.
from the power sources.

Werbung

loading