Scheppach HM305SL Originalbetriebsanleitung Seite 27

35. Indexed position lever
36. Safety bolt for swiveling function
37. Longitudinal stop
38. Adjustment screw
A.) 90° stop bracket (not included in the scope of
supply)
B.) 45° stop bracket (not included in the scope of de-
livery)
C.) Allen key, 6 mm
3. Scope of delivery
• Sliding cross-cut mitre saw
• 1 x Clamping device (7)
• 2 x Workpiece support (8) (pre-assembled)
• Dust bag (17)
• Allen key, 6 mm (C)
• Operating manual
4. Proper use
The sliding cross-cut mitre saw is used for the cutting
of wood and plastic, according to the machine size. The
saw is not suitable for the cutting of firewood.
Warning!
Do not use the device to cut materials other than those
described in the operating manual.
Warning!
The supplied saw blade is only intended for the sawing
of wood! Do not use this blade for sawing firewood!
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
Only suitable saw blades may be used for the machine.
The use of any type of cutting wheels is prohibited.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the machine must
be familiar with it and must be informed about potential
dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the ma-
chine.
Despite use as intended, specific risk factors cannot be
entirely eliminated. Due to the design and layout of the
machine, the following risks remain:
• Contact with the saw blade in the exposed sawing
area.
• Reaching into the running saw blade (cutting injury).
• Kick-back of workpieces and workpiece parts.
• Saw blade breakage.
• Ejection of faulty carbide parts of the saw blade.
• Hearing damage when the necessary hearing pro-
tection is not used.
• Harmful emissions of wood dusts during use in en-
closed areas.
Please note that our equipment was not designed with
the intention of use for commercial or industrial purpos-
es. We assume no guarantee if the device is used in
commercial or industrial applications, or for equivalent
work.
5. Safety instructions
General power tool safety warnings
m WARNING! Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this electric tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or se-
rious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool.
1. Work area safety
• Keep your work area clean and well-lit. Cluttered
or dark areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
www.scheppach.com GB | 27