Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Sound-controlled mode
With this function, you can adjust the sound-controlled mode and the desired microphone sensitivity.
• Select "SoUn" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [UP] or [DN] to select "SoU1", "SoU2" or "SoU3".
• Press [ENTER] to confirm.
• Press [UP] or [DN] to select the desired microphone sensitivity between "SEn0" (low sensitivity) and
"SEn9" (high sensitivity).
• Press [ENTER] to confirm.
• Press [MENU/ESC] in order to return to the main menu.
Slave setting
With this function, you can define the device as slave.
• Select "SLAV" by pressing [UP] or [DN].
• Press [ENTER], the display shows "ON" or "OFF".
• Press [ENTER] to confirm.
• Press [MENU/ESC] in order to return to the main menu.
Software version
With this function you can display the software version of the device.
• Select "VER" by pressing [UP] or [DN].
• Press [ENTER], the display shows shows "XX", "XX" stands for the version number, e.g. "11".
• Press [MENU/ESC] in order to return to the main menu.
DMX-controlled operation
You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
The EUROLITE LED Bar 384 RGB 5mm has 6 DMX-modes.
Addressing
Depending on the DMX-mode, each device of the EUROLITE LED Bar 384 RGB 5mm occupies 3, 5, 8, 14,
24 or 26 DMX-channels. If you select Mode "5Ch" for example, the device occupies 5 DMX-channels. The
Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the LED Bar 384 RGB 5mm will respond to the controller.
If you set, for example, the address to channel 6, the control LED Bar 384 RGB 5mm will use the channel 6
to 10 for control.
Please make sure that you don't have any overlapping channels in order to control LED Bar 384 RGB 5mm
correctly and independently from any other fixture on the DMX data link.
If several LED Bar 384 RGB 5mm are addressed similarly, they will work synchronically.
Press the Up/Down buttons for setting the desired starting address. Now you can start operating LED Bar
384 RGB 5mm via your lighting controller.
26/30
00043903.DOC, Version 2.0
Werbung
