EuroLite LED Bar 384 RGB 5mm Lighting Effect Bedienungsanleitung Seite 25

Control Board
The Control Board offers several features: you can simply set the starting address, switch on and off the
LEDs or run the pre-programmed program.
The main menu is accessed by pressing Menu/Esc. Browse through the menu by pressing Up or Down.
Press Enter in order to select the desired menu. You can change the selection by pressing Up or Down.
Press Enter in order to confirm. You can leave every mode by pressing Menu/Esc. The functions provided
are described in the following sections.
• Select "CoLo" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [UP] to select "CoL1" – "CoL9" or "AtF".
• Press [ENTER] to confirm.
• Press [MENU/ESC] in order to return to the main menu.
adjust the desired DMX-address via the
Control Board.
• Select "Addr" by pressing [UP] or
[DN].
• Press [ENTER], adjust the DMX
address by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [MENU/ESC] in order to return to
main menu.
adjust the Auto mode.
• Select "AUto" by pressing [UP] or
[DN].
• Press [ENTER] to confirm.
• Press [UP] to select "AUt1", "AUt2" or
"AUt3".
• Press [ENTER] to confirm.
• Press [MENU/ESC] in order to return to
the main menu.
With the function "AUt2", you can also
select the desired speed between "SP 1"
and "SP 9".
adjust the DMX channel mode.
• Select "Chnd" by pressing [UP] or
[DN].
• Press [ENTER] to confirm.
• Press [UP] to select "3Ch", "5Ch",
"8Ch", "14Ch", "24CH" or "26Ch".
• Press [ENTER] to confirm.
• Press [MENU/ESC] in order to return to
the main menu.
select the preset colors (CoL1 – CoL9) or
adjust the RGB colour intensity (AtF)
between values 0 and 255 (0 = black,
255 = 100 % red, green or blue).
25/30
DMX address setting
With this function, you can
Automatic program mode
With this function, you can
Adjust DMX channel mode
With this function, you can
Preset Colors/RGB color
With this function, you can
00043903.DOC, Version 2.0