Rechargeable battery operation ........................24 Battery status ............................... 24 OPERATION ..............................24 Control board ............................... 25 EUROLITE IR-7 remote control ........................26 DMX-controlled operation ..........................27 Selecting the number of DMX channels and the DMX starting address ............27 DMX protocol ............................... 27 CLEANING AND MAINTENANCE ........................28...
- sich die letzte Version der Anleitung im Internet herunter laden EINFÜHRUNG Wir freuen uns, dass Sie sich für den EUROLITE LED-Scheinwerfer ACCU SLS-180 RGBA Spot entschieden haben Wenn Sie nachfolgende Hinweise beachten, sind wir sicher, dass Sie lange Zeit Freude an Ihrem Kauf haben werden.
Seite 4
Bitte überprüfen Sie vor der ersten Inbetriebnahme, ob kein offensichtlicher Transportschaden vorliegt. Sollten Sie Schäden an der Netzleitung oder am Gehäuse entdecken, nehmen Sie das Gerät nicht in Betrieb und setzen sich bitte mit Ihrem Fachhändler in Verbindung. Der Aufbau entspricht der Schutzklasse I. Der Netzstecker darf nur an eine Schutzkontakt-Steckdose angeschlossen werden, deren Spannung und Frequenz mit dem Typenschild des Gerätes genau übereinstimmt.
BESTIMMUNGSGEMÄSSE VERWENDUNG Bei diesem Gerät handelt es sich um einen Effektstrahler, mit dem sich dekorative Lichteffekte erzeugen lassen. Es ist für professionelle Anwendungen, z. B. auf Bühnen, in Diskotheken und Theatern vorgesehen. Dank des eingebauten Akkus ist es ideal für den mobilen Einsatz geeignet. Die Stromversorgung des Geräts kann mittels 100-240 V, 50/60 Hz~ Netzspannung oder über den eingebauten Lithium-Ionen-Akku (11,1 V, 5400 mAh) erfolgen, der sich bei Netzanschluss des Geräts aufladen lässt.
Beachten Sie bitte, dass eigenmächtige Veränderungen an dem Gerät aus Sicherheitsgründen verboten sind. Der Serienbarcode darf niemals vom Gerät entfernt werden, da ansonsten der Garantieanspruch erlischt. Wird das Gerät anders verwendet als in dieser Bedienungsanleitung beschrieben, kann dies zu Schäden am Produkt führen und der Garantieanspruch erlischt.
Geräteübersicht (1) Feststellschrauben (2) Ladeanzeige rot (Ladevorgang aktiv) M IC (3) Ladeanzeige grün (Akku voll geladen) M O D E D M X oc U P D O W cu pa tio n: (4) LED-Anzeige und Programmiertasten N EN TE 1: G ro un 2: Si gn al D M X IN...
Seite 8
Vorgehensweise: Das Gerät sollte idealerweise außerhalb des Aufenthaltsbereiches von Personen installiert werden. WICHTIG! ÜBERKOPFMONTAGE ERFORDERT EIN HOHES MASS AN ERFAHRUNG. Dies beinhaltet (aber beschränkt sich nicht allein auf) Berechnungen zur Definition der Tragfähigkeit, verwendetes Installationsmaterial und regelmäßige Sicherheitsinspektionen des verwendeten Materials und des Gerätes. Versuchen Sie niemals, die Installation selbst vorzunehmen, wenn Sie nicht über eine solche Qualifikation verfügen, sondern beauftragen Sie einen professionellen Installateur.
DMX512-Ansteuerung Achten Sie darauf, dass die Adern der Datenleitung an keiner Stelle miteinander in Kontakt treten. Die Geräte werden ansonsten nicht bzw. nicht korrekt funktionieren. Beachten Sie, dass die Startadresse abhängig vom verwendeten Controller ist. Unbedingt Bedienungsanleitung des verwendeten Controllers beachten. Die Verbindung zwischen Controller und Gerät sowie zwischen den einzelnen Geräten sollte mit einem DMX-Kabel erfolgen.
Einstellungen mit den Tasten MODE, ENTER, UP und DOWN vornehmen. Das Gerät hat zwei Betriebsarten. Es kann entweder im Standalone-Modus über das Control Board und die EUROLITE IR-7 Fernbedienung oder im DMX-gesteuerten Modus über einen handelsüblichen DMX- Controller betrieben werden.
Control Board Das Control Board bietet mehrere Möglichkeiten: so lassen sich z. B. die DMX-Startadresse eingeben, ein internes Programm abspielen oder der DMX-Kanal-Modus auswählen. Durch Drücken der MODE-Taste können Sie sich im Hauptmenü bewegen. Durch Drücken der UP/DOWN-Taste können Sie die Auswahl verändern. Bestätigen Sie jede Änderung durch Drücken der ENTER-Taste.
Fernbedienung EUROLITE IR-7 Das Gerät muss für die Ansteuerung per Fernbedienung aktiviert werden. Wählen Sie dazu im Menüpunkt SET die Einstellung On. Halten Sie beim Betätigen einer Taste die Fernbedienung immer in Richtung des Sensors auf der Gerätevorderseite. Zwischen der Fernbedienung und dem Sensor muss Sichtverbindung bestehen.
Bitte vergewissern Sie sich, dass sich die Steuerkanäle nicht mit anderen Geräten überlappen, damit das Gerät korrekt und unabhängig von anderen Geräten in der DMX-Kette funktioniert. Werden mehrere ACCU SLS-180 RGBA Spots auf eine Adresse definiert, arbeiten sie synchron. Nachdem Sie die Startadresse definiert haben, können Sie das Gerät über Ihren Controller ansteuern.
- download the latest version of the user manual from the Internet INTRODUCTION Thank you for having chosen the EUROLITE ACCU SLS-180 RGBA Spot. If you follow the instructions given in this manual, we are sure that you will enjoy this device for a long period of time.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C connection cable or on the casing, do not take the device into operation and immediately consult your local dealer. This device falls under protection-class I. The power plug must only be plugged into a protection class I outlet.
OPERATING DETERMINATIONS This device is a lighting effect for creating decorative effects. It is designed for professional use, e.g. on stage, in discotheques or theaters. Thanks to the integrated rechargeable battery it is ideally suited for mobile applications. The device can be operated with 100-240 V, 50/60 Hz mains voltage or via the integrated lithium ion rechargeable battery (11.1 V, 5400 mAh) which can be recharged when connecting the device to the mains.
If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short- circuit, burns, electric shock, crash etc. Batteries Batteries are hazardous waste which needs to be disposed of appropriately.
(11) Mounting brackets (12) On/Off switch INSTALLATION The ACCU SLS-180 RGBA Spot can be installed on the ground or on the wall or ceiling. Overhead rigging DANGER TO LIFE! Please consider the EN 60598-2-17and the respective national standards during the installation!
The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled person once a year. Procedure: The device should be installed outside areas where persons may walk by or be seated. IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to) calculating working load limits, installation material being used, and periodic safety inspection of all installation material and the device.
DMX512 control The wires must not come into contact with each other, otherwise the devices will not work at all, or will not work properly. Please note, the starting address depends upon which controller is being used. Only use a DMX cable and 3-pin XLR plugs and connectors in order to connect the controller with the fixture or one fixture with another.
The earth has to be connected! If the device will be directly connected with the local power supply network, a disconnection switch with a minimum opening of 3 mm at every pole has to be included in the permanent electrical installation. The device must only be connected with an electric installation carried out in compliance with the IEC standards.
Control board The control board offers several features, i.e. setting the DMX starting address, running a preset program or selecting a DMX channel mode. Browse through the menu by pressing MODE. You can change the selection by pressing UP or DOWN. Press ENTER in order to confirm. You can leave every mode by pressing MODE.
EUROLITE IR-7 remote control The device must be activated for remote control. For this, set menu item SET to On. When actuating a button, always hold the remote control in the direction of the sensor. There must be visual connection between the remote control and the sensor.
Then set the DMX starting address with the buttons UP and DOWN and confirm your setting with ENTER. The DMX starting address is the first channel from which the ACCU SLS-180 RGBA Spot will respond to the controller. Please make sure there are no overlapping channels in order to control each ACCU SLS-180 RGBA Spot correctly and independently from any other fixture on the DMX chain.
8-channel mode Channel Value Function 000-255 Red 0 – 100% 000-255 Green 0 – 100% 000-255 Blue 0 – 100% 000-255 Amber 0 – 100% 000-015 No function 016-255 Color macros 000-015 No function 016-255 Strobe Slow → fast (flash frequency 1-23 Hz) 000-255 Speed Slow →...
Remote control Power supply: CR2025 button cell 3 V Accessories EUROLITE IR-7 Remote control 50530561 EUROLITE TPC-10 Coupler, black 59006858 Saveking Safety bond 3x600 silver 58010250 EUROLITE DMX LED Operator 2 controller 70064502 SB-18 Softbag 30130555 29/30 00081934, Version 1.0...