Werbung
Verfügbare Sprachen
Verfügbare Sprachen
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Light ouput intensity:
Beam angle:
Number of LEDs:
Type of LED:
DMX control channels:
DMX512 connection:
Sound-control:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Please note: Every information is subject to change without prior notice. 14.02.2011 ©
230 V AC, 50 Hz ~
65 W
R 30000 mcd,
G 30000 mcd,
B 20000 mcd
approx. 16°
384
5 mm
3/5/8/14/24/26
3-pin XLR
via built-in microphone
1070 x 70 x 90 mm
2 kg
:
45° C
a
(steady state): 55° C
B
0.5 m
0.1 m
F 1 A, 250 V
30/30
00043903.DOC, Version 2.0
Werbung
