Herunterladen Diese Seite drucken

Parkside PISE 3400 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 10

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
2. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we wish you much pleasure and success in working with your
new device.
Note:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for damage to
the device or caused by the device arising from:
• Improper handling,
• Failure to comply with the operating instructions,
• Repairs carried out by third parties, unauthorised special-
ists,
• Installing and replacing non-original spare parts,
• Application other than specified.
Note:
Read the whole text of the operating manual before assembly
and commissioning.
This operating manual should help you to familiarise yourself
with your device and to use it for its intended purpose.
The operating manual includes important instructions for safe,
proper and economic operation of the device, for avoiding
danger, for minimising repair costs and downtimes, and for
increasing the reliability and extending the service life of the
device.
In addition to the safety instructions in this operating manual,
you must also observe the regulations applicable to the opera-
tion of the device in your country.
Keep the operating manual at the device, in a plastic sleeve,
protected from dirt and moisture. They must be read and care-
fully observed by all operating personnel before starting the
work. The device may only be used by personnel who have
been trained to use it and who have been instructed with re-
spect to the associated hazards.
In addition to the safety instructions in this operating manual
and the separate regulations of your country, the generally
recognised technical rules relating to the operation of such
machines must also be observed.
We accept no liability for accidents or damage that occur
due to a failure to observe this manual and the safety in-
structions.
4
GB/IE/NI/CY/MT
3. Device description (Fig. 1 - 16)
1.
Sight glass for fuel
2.
Fuel filler cap
3.
Pull starter
4.
Cover
5.
Wheels
6.
Earthing screw
7.
12 V DC. Circuit breaker
8.
12 V DC connection
9.
230 V ~ - socket (2x)
10. Battery compartment cover
11. Fuel valve
12. Folding transport handle
13. Energy-saving switch (ECO)
14. Ignition lock
15. "RESET" button
16. Display
17.
Battery
17a. Battery connection cable
17b. Engine connection cable
17c. Battery bracket
18. Pairing button
19. Oil dipstick
20. Fuel filter insert
21. Fuel tank
22. Handle
23. Oil warning indicator
24. Overload indicator
25. Operating display
26. Display button
27. Engine cover
28. Spark plug
29. Spark plug connector
30. Oil drain screw
31. Oil drain plug
32. Air filter cover
32a. Wing nut
32b. Washer
33. Air filter
4. Scope of delivery
A
Power generator/inverter
B
Ignition key (2x)
C
Radio remote control (2x)
D
Spark plug wrench
E
Adapter cable with 12V terminals
F
Phillips screwdriver
G
Oil filler bottle

Werbung

loading