cecotec CONGA WINDROID 880 SprayWater Bedienungsanleitung Seite 50

ENGLISH
How to activate the safety measures.
Before starting
- To clean windows or glass doors without a balcony, you must place a safety warning for
the persons near the objects.
- After every use, check the safety rope does not show any damage or flaws. You must also
check the wire from the safety rope is properly secured and at the appropriate height.
Positioning the rope
- Loosen the thread from the end of the rope and tighten it in the hole (7).
- Position the rope in the robot as shown in the figure. (Fig. 6)
- Secure the safety rope before using the robot, ensuring it is tight. Place the hook from the
other end of the sope to a fix and stable object at home to prevent risks. Male sure the rope
height is appropriate to prevent risks in case of accidental dropping.
How to pour water/glass cleaner
Fig. 7
- Open the hole which is sealed with a silicone tab.
- Pour the liquid. Use water or glass cleaner. Do not introduce any other liquid.
How to place the Conga WinDroid robot on the glass/window
- Hold down the On/off button and make sure the fan is activated.
- Put the robot onto the glass or window. Keep it 10 cm away from the window frame.
- Make sure the robot stays firmly on the glass before releasing it.
Note
Hold the robot with your hand before turning it off.
How to remove the Conga WinDroid robot from the glass/window
- When the cleaning is finished, hold the power cord tightly with one hand and detach the
robot from the glass with the other.
- Turn the power switch off when the robot is left on a safe surface.
UPS (Un-interrupted Power System) function
This safety system will be effective when the electric circuit fails. It provides up to 30-min
autonomy depending on the charge level and the previous work.
The product will stop operating automatically and the red light indicator will blink.
Remove the robot from the glass as soon as possible. You can pull carefully from the safety
rope to detach it.
Remember: The device should not be unattended while it is connected to a power supply.
50