Herunterladen Diese Seite drucken

EuroLite LED T-Cube Bedienungsanleitung Seite 9

Led cb-8/cb-16 ir controller

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
The maximum ambient temperature T
= 45° C must never be exceeded.
a
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short-circuit, burns, electric shock, lamp explosion, crash etc.
OPERATION
The EUROLITE LED T-Cube comes without bottom or lid. This enables easy mounting of items in the center
of the cube which are to be displayed and illuminated. Simply place the EUROLITE LED T-Cube on top of an
already present LED Cube, create the desired display, then place further LED Cubes on top of the LED T-
Cube.
Connect the connection-cable ends with the sockets of the LED luminaries and the controller.
Connect the system to the mains with the power-plug.
You can select the programs by pressing the buttons on the controller.
Attention: The controller can be used with at least 4 and up to 8 or 16 luminaries, respectively.
CLEANING AND MAINTENANCE
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
9/18
51930491_V_1_0.DOC

Werbung

loading