Device Description - Stalgast 486812V01 Bedienungsanleitung

• Have any faults or damage to the machine repaired only by specialists authorised by the machine manufacturer.
• Use only original accessories for the coffee machine.
• For replacement or maintenance of the device, contact the customer service department of the device manu-
facturer.
• Do not clean the device under a jet of water or with steam.
• Do not place the device in areas where water or steam pressure washers are used.
• The coffee bean hopper is for inserting coffee beans to be ground only, and only tablets should be inserted into
the tablet tray.
• Do not use frozen coffee beans, as this may cause the coffee brewing unit to become sticky.
• If the appliance and its spare parts are transported at temperatures below -10 °C, there is a risk of short-circuiting
and damaging the electrical and water systems through frozen water.
• Use only a new set of cables!
3. READ BEFORE FIRST USE
1. Make sure that the coffee brewing unit is locked in position and that the coffee waste container and drip tray
are in place.
2. Fill the water container with clean water.
3. Before initial use, pour more than 30 g of coffee beans into the bean hopper.
4. The mill must be calibrated
A scale with an accuracy of 0.1g is required to perform the calibration process
• Click on the shortcut icon.
• Click on the „Service Menu" icon and enter the password 1809.
• Click „Service settings".
• Click „Coffee calibration".
• Go through the calibration process according to the instructions on the display after each weighing by
taring the scale and recording the result.
• After entering the results from three consecutive weighings, click „Save".
• The calibration of the grinder is now complete.
(Note: Only coffee beans can be poured into the bean hopper; do not pour water, ground coffee, coffee beans mixed
with rocks or other hard objects into the bean hopper, as this will damage the coffee grinder).

4. DEVICE DESCRIPTION

This fully automatic coffee maker is used to brew black coffee, coffee with milk and prepare hot milk. Since the ma-
chine has a very high capacity to make many cups of coffee per day, it is ideal for use in restaurants, offices and other
places with a high demand for coffee.
You can prepare the following beverages with its help:
• Black coffee, coffee with milk and dairy products.
• Hot water and steam
The housing of the machine is made of aluminum and high quality plastic. The design of the machine and all acces-
sories makes it easy for its operator to comply with the following requirements:
• HACCP hygiene regulations.
• Accident prevention and electrical safety regulations in the commercial area.
The device is equipped with a touch display - control panel.
5. CONSTRUCTION OF THE DEVICE
Water tank cover
Water container
Coffee outlet cover
Milk outlet
Boiling water outlet
Socket for
power cord socket
Drip tray
Coffee hopper lid
Bean hopper
Display
Connecting the milk duct
to milk
Coffee outlet
Drip tray cover
Power switch
Connection of the water supply line
water supply
- 44 -