Silvercrest SBTF 10 E5 Bedienungsanleitung Seite 71

Pairing the hands-free set with a compati-
ble mobile phone
Before you can use the hands-free set, you must pair it with a
compatible mobile telephone .
♦ Switch the hands-free set on . After a short time, the
button
will hear two high beeps . The hands-free set is now in
pairing mode for about 2 minutes . If the pairing does
not happen within this time, you will hear a low beep
and the hands-free set switches off .
Set the mobile telephone so that it scans for Bluetooth
♦
devices . A detailed description of how to do this can
be found in the operating instructions for your mobile
telephone .
♦ Select the entry SBTF 10 E5 from the list of found de-
vices on your mobile phone to pair the two devices . The
name of the hands-free set, SBTF 10 E5, now appears
on the list of paired devices on your mobile phone .
NOTICE
► If you are asked to enter a PIN during pairing, enter
0000 .
► If the pairing is successful, you will hear a short beep .
♦ The hands-free set is now in standby mode and the
button
connection to the mobile phone is lost, the
flashes briefly blue every 10 seconds .
■ 64 │ GB │ MT
flashes alternately blue and orange . You
flashes blue every 10 seconds . If the
®
button
SBTF 10 E5