Silvercrest SBTF 10 E5 Bedienungsanleitung Seite 73

Multipoint function
The multipoint function allows you to use the hands-free set
with two mobile phones simultaneously . This is useful for
users with a private and a business mobile phone .
♦ The pairing of additional mobile phones is carried out
in the same manner as described in the section Pairing
the hands­free set with a compatible mobile phone .
Start the pairing process for each phone with the
hands-free set switched off . The Bluetooth
must be switched off on all already paired devices .
NOTICE
► Alternatively, press the
to deactivate the active connection . The hands-free set
does not need to be switched off for this and switches
directly to pairing mode .
If you have paired several mobile phones, the hands-free set
will now have several "known" devices available . This status
is a prerequisite for an active connection between the hands-
free set and other mobile phones . A maximum of 8 mobile
phones can be saved as "known" devices . The number of
devices that can be actively linked to the hands-free set is
limited to two . As soon as one or two of the known devices
come into range of the hands-free set, the connection to
the devices is made automatically . In some cases, you must
confirm the connection manually on your mobile phones .
If a third "known" device comes into range of the hands-free
set, the connection to this device will remain blocked until
one of the two active connections is broken or one of the
two devices leaves the transmission range . If the connection
of one of the paired devices is broken, the link becomes free
for the third (waiting) device .
If two mobile phones are linked to the hands-free set, differ-
ent ring tones are used for incoming calls .
NOTICE
► With some mobile phones, it is possible that the hands-
free set must be restarted if several mobile phones are
connected .
■ 66 │ GB │ MT
button for 3 seconds
®
function
SBTF 10 E5