Establishing A Connection With A Bluetooth ® Device - Silvercrest SBF 2 A1 Bedienungs- Und Sicherheitshinweise

Any other use beyond what is specified is not
¾
intended .
˜ Establishing a connection with a
Bluetooth
Switching on: Hold
¾
2 seconds . The LED 3 flashes whites and an
acoustic signal sounds .
Place the headset near a switched on
¾
communication device (e . g . mobile or
computer) .
Pairing with a new Bluetooth
¾
– Switch off the product .
– Hold
LED 3 flashes red and white and an acoustic
signal sounds . This indicates that the headset
is now in pairing mode .
The pairing mode remains active for
5 minutes .
device
®
3 for approx .
3 for approx . 4 seconds until the
device:
®
GB/IE 59