MR TAPCON 230 Montageanleitung Seite 33

2. Position the cable shielding, screw it into the shield clamp provided, and pro-
vide strain relief (using a cable tie).
Figure 28: Shield clamp and strain relief
3. Connect the COM-X1 RJ45 interface and the CPU-X4 interface together us-
ing the patch cable.
5.4.5.2 Serial RS232 (D-SUB 9-pole) interface
Data cable
To connect the device via the RS232 interface, use a data cable with the follow-
ing structure:
9
6
Figure 29: RS232 data cable (9-pole)
D-SUB 9-pole plug connection
Only use 9-pole D-SUB plugs with the following characteristics:
– Plug housing is metallic or metal-plated
– Cable shielding is connected with the plug using one of the following two
variants:
– Shielding is screwed down with traction relief.
– Shielding is soldered to the plug housing.
1
RXD 2
TXD 3
5
4
GND 5
6
1
7
8
9
1
2
3
5
9
4
5
1
6
6
1
7
8
9
7820658/06 EN Mounting
33